Bumper for all Plastimo pontoons
€95.20
-15%
was
€112.00
SKU
PL-BUMPER_PONTON
Ref. : PL-BUMPER_PONTON
Real bumper to be fixed on the pontoon (patented). Depending on its location, the Plastimo All Pontoons Bumper will protect thebow or the side of the boat.
Need an advice ?
BUMPER FOR ALL PLASTIMO PONTOONS
Real bumper to be fixed on the pontoon (patented). Depending on its location, the Plastimo All Pontoons Bumper will protect thebow or the side of the boat.
This boat protection equipment can be used on all types of pontoons and breakdowns thanks to its no-drill system. Indeed, theinstallation process has been simplified by Plastimo so that the head of the bolt locks into the groove. You can therefore adjust your fender from 40 to 120 mm from the edge of the pontoon.
See the size guide for the dimensions (in mm) of this Bumper.
Read more
Technical specifications
- Made of rotomolded PVC, 150 mm thick on the impact area, UV protected.
- Maximum pressure: 0.10 bar / 1.45 psi.
- Dimensions: 900 x 307 mm
- Kit of 4 fasteners (316 stainless steel T-bolts) not included with the Bumper. To be ordered separately (reference 65843)
Nauti'Conseil:
To optimize the efficiency of the fender or Bumper, it is recommended to check the pressure once or twice a year. The ideal pressure is obtained either by checking with a pressure gauge or by measuring the circumference of the product. To be effective, these products must be neither too little nor too much inflated. (Recommended pressure: 0.07 to 0.10 bar)
Sailing essentials
Write Your Own Review
