DP9906 Whale spare hatch

DP9906 WHALE REPLACEMENT HATCH: ESSENTIAL ACCESSORY FOR WHALE BILGE PUMPS

DP9906 Whale replacement hatch is an accessory designed for WHALE bilge pumps, a brand renowned in the nautical environment for its reliable pumping solutions. This watertight hatch is compatible with MK5 double action pumps (MH5560) through the deck, and can also be used to embed a WHALE MK5 universal pump in a locker, allowing use from outside the boat.

The replacement hatch ensures a clean and watertight installation of your bilge pump. Installation requires a deck or bulkhead thickness of between 13 mm and 25 mm. The conversion ring is installed with the smooth side facing the pump, following the markings and specific instructions according to the pump model (BP0510 MK5 Universal or MH5560 MK5 double action through deck). It is important to ensure that the pump rocker is correctly positioned in the ring for optimal handle operation.

Installation involves selecting a suitable location for the pump, allowing easy access to the handle and top cover in case of obstruction. A template is provided to drill the necessary holes, and it is recommended to round the upper edge of the large hole to protect the seal. The DP9906 Whale replacement hatch is then securely fastened using the screws and nuts provided.

The DP9906 Whale replacement hatch kit contains: 1 Inlet valve plate, 1 Intake valve, 2 Long valve screws, 1 Top cover seal, 1 Diaphragm, 1 Outlet valve, 2 Long valve screws, 2 Large circlips, 2 Small circlips, and 8 M5x25 screws with nuts. With the DP9906 Whale replacement hatch, ensure a watertight and functional installation of your bilge pump.