PM488 combined transducer for Furuno DFF3D/DFF1UHD

🎣 Designed for Furuno DFF3D and DFF1UHD modules.
📡 CHIRP compatible (B265LH), bottom discrimination and Accu-Fish.
🌡️ Equipped with a motion sensor and a temperature sensor.
⚡ 800W power at 165kHz; CHIRP frequencies: 42-65kHz (Low) and 130-210kHz (High).
📦 Contains the PM488 transducer, two 12m cables, and PDF documentation.
Need an advice ?
PM488 COMBINED TRANSDUCER FOR FURUNO DFF3D/DFF1UHD: SOUNDER PERFORMANCE AND COMPATIBILITY
This compact 165T / 265LH PM488 combined transducer for Furuno DFF3D/DFF1UHD is designed for use with DFF3D and DFF1UHD modules, while maintaining the CHIRP capabilities of the B265LH transducer.
FEATURES AND COMPATIBILITY
The PM488 combined transducer for Furuno DFF3D/DFF1UHD offers bottom discrimination and Accu-Fish functions. It is particularly suitable for an installation combining a DFF1-UHD CHIRP sounder module and a DFF3D 3D sounder module.
MAIN TECHNICAL SPECIFICATIONS
This transducer is equipped with a motion sensor and a temperature sensor.
It features a 0° ceramic and a power of 800W at a frequency of 165kHz.
The CHIRP frequencies are as follows: Low CHIRP from 42 kHz to 65 kHz and High CHIRP from 130 kHz to 210 kHz.
BOX CONTENTS
The pack includes one PM488 combined transducer for Furuno DFF3D/DFF1UHD - 165T / 265LH, two 12m cables, and documentation in PDF format.
Read more
Technical specifications
- Furuno PM488 combined transducer for DFF3D/DFF1UHD
- DFF3D and DFF1UHD compatible
- Integrates the CHIRP capabilities of the B265LH transducer
- Bottom discrimination and Accu-Fish functions
- Integrated motion sensor
- Integrated temperature sensor
- Tilt: 0°
- Power: 800W
- Frequency: 165kHz
- Low CHIRP: 42 kHz to 65 kHz
- High CHIRP: 130 kHz to 210 kHz
- Supplied with a 12m cable harness for DFF1-UHD (7-pin connector)
- Supplied with a dedicated cable harness for DFF3D
























